The Memory pouch-2.doc

 

The Memory Pouch as to fit a File Folder

  1. Cut 2 rectangles (1 of main fabric and one for lining) measuring 30″ (32″) long and 10″ (12″) wide.
  2. Cut the top to make a Triangle (see picture in link above).
  3. Place the lining on top of the main fabric and sew together a 1/2″ inch seam around leaving a small opening for turning it inside out.
  4. Turn inside out.
  5. Fold the bottom up to beginning of the triangle to make the pocket (12in.)
  6. Sew the two sides together. This will make the pocket.
  7. Sew ribbon for tie at the point of the triangle.
  8. Fold the triangle and measure where the other part of ribbon tie should be and tack it on.
  9. Alternative Closure: Stitch bow of 1/4 inch ribbon to point of flap; sew Velcro dots to underside of flap and body of bag.

 

Large Memory Pouch[591395]

  1. Cut double sided quilted fabric 18×38 inches.
  2. Cut lining to same dimensions.
  3. Find the center of one end and mark. Measure 5.5 inches down on each side. Cut from center mark to side mark on both sides to create a triangle. Cut lining to match.
  4. Place lining on top of quilted fabric, right side down; sew with a 1/2 inch seam, all around, leaving an opening to turn right side out.
  5. Turn right side out.
  6. Turn bottom up 15 inches. Find center of bottom edge and mark 2.5″ inches down. Place a 2″ inch strip of Velcro at this point.
  7. Sew the sides together forming a pocket.
  8. Sew other half of Velcro to underside of flap lining up the halves.
  9. Turn pouch inside out and square bottom corners.
  10. Turn right side out; attach a bow to the flap.